|
|
 Click on Thumbnails Below to Enlarge Image
|
|
Detailed images:
|
The Vanguard lockers have been the industry standard for rugged, dependable design for decades. The Vanguard standard lockers are available in a wide variety of configurations and sizes and are among the quietest on the market. Featuring large doors with louvers, die cast handles, and a powder coat baked enamel finish, they withstand the daily use and abuse typically given to a locker. About the Materials and Finish
All locker body parts and shelves are made from prime grade 24 gauge mild cold rolled sheet steel free from surface imperfection, and capable of taking a high grade enamel finish. Doors 30" or higher are formed from one piece 16 gauge while doors less than 12" wide are 18 gauge. Single tier doors over 15" wide have a 3" wide 20 gauge full height reinforcing pan welded to the inside face of the door on 6" centers. The powder coat baked enamel finish is electro-statically applied and available in 21 Colors. All locker body parts are finished in the same color. About the Vanguard Locker Construction
Built on the unit principle - each locker has an individual door and frame, top, bottom, back, hooks and shelves with common intermediate uprights separating compartments. The welded door frames have mortise and tenon construction and are spot welded for lifetime rigidity. Features include: - Latch clips engage the door frame at three points on doors over 42" high and two points on all other doors
- Special nylon glides fastened to the latch channel assembly and rubber silencers minimize noise
- Patented die-cast handle that accepts built-in locks or padlocks
- Handle opens with a single motion pull, and closes easily while the spring loaded latch clips secure the door even if locked
- Every door has a continuous door strike
- Two sets of standard ventilation louvers
- Doors have three hinges
- All Hinges are full loop, 5 knuckle design
- Full channel formations are on the lock and hinge sides of the door to conceal and protect the lock bar and hinges
- Right angle flanges are on the top and bottom.
- Standard 6” legs on standard lockers.
- Front legs are integrated into the door frame
- Rear legs are adjustable for leveling and anchoring
About the Additional Equipment Each locker has a polished aluminum number plate attached to the door, 2-1/4" wide x 1" high, with black numerals not less than 3/8" high. If the starting number is not specified, 1 will be the standard start. The single tier lockers also include the following: - Book Shelf 9” below the top
- Three single-prong hooks and one double-prong ceiling hook
- Lockers 18” or deeper have a coat rod as well as coat hooks
- Coat hooks and coat rods are zinc plated
About the Compartment Sizes These Vanguard Standard Lockers have an overall height of 78” including the standard 6” legs. The compartment sizes available are: - 72”H x 9"W x 12"D, Overall Size: 78”H x 18”W x 12”D, 90 lbs.
- 72”H x 9”W x 15”D, Overall Size: 78”H x 18”W x 15”D, 96 lbs.
- 72”H x 9”W x 18”D, Overall Size: 78”H x 18”W x 18”D, 102 lbs.
- 72”H x 12"W x 12"D, Overall Size: 78”H x 24”W x 12”D, 98 lbs.
- 72”H x 12"W x 15"D, Overall Size: 78”H x 24”W x 15”D, 102 lbs.
- 72”H x 12"W x 18"D, Overall Size: 78”H x 24”W x 18”D, 110 lbs.
- 72”H x 12"W x 21”D, Overall Size: 78”H x 24”W x 21”D, 122 lbs.
- 72”H x 12”W x 24”D, Overall Size: 78”H x 24”W x 24”D, 132 lbs.
- 72”H x 15”W x 12”D, Overall Size: 78”H x 30”W x 12”D, 116 lbs.
- 72”H x 15”W x 15”D, Overall Size: 78”H x 30”W x 15”D, 124 lbs.
- 72”H x 15”W x 18”D, Overall Size: 78”H x 30”W x 18”D, 130 lbs.
- 72”H x 15”W x 21”D, Overall Size: 78”H x 30”W x 21”D, 138 lbs.
- 72”H x 15”W x 24”D, Overall Size: 78”H x 30”W x 24”D, 144 lbs.
- 72”H x 18”W x 12”D, Overall Size: 78”H x 36”W x 12”D, 138 lbs.
- 72”H x 18”W x 15”D, Overall Size: 78”H x 36”W x 15”D, 142 lbs.
- 72”H x 18"W x 18"D, Overall Size: 78”H x 36”W x 18”D, 143 lbs.
- 72”H x 18"W x 21"D, Overall Size: 78”H x 36”W x 21”D, 154 lbs.
- 72”H x 18"W x 24"D, Overall Size: 78”H x 36”W x 24”D, 156 lbs.
- 72”H x 24"W x 18”D, Overall Size: 78”H x 48”W x 18”D, 176 lbs.
- 72”H x 24”W x 21”D, Overall Size: 78”H x 48”W x 21”D, 182 lbs.
- 72”H x 24”W x 24”D, Overall Size: 78”H x 48”W x 24”D, 188 lbs.
About the Available Options
Classic III Recessed handles are available as well as built-in key or combination locks. The Vanguard lockers are standard with 6” legs but can be ordered without legs for recessed locker applications. Door or side ventilation options are also available.
An End Row Panel should be ordered to complete your locker – whether a single wide or a an entire suite.
About the Available Accessories
Zee Bases, Front Bases and End Bases are accessories that will provide a finished looked to your locker setting. Sloping Hoods are available with hidden fasteners making a flush exterior surface. Concrete Floor Anchors are recommended for use in anchoring lockers to the floor, making them secure and safe. Padlocks are available for additional locker security if needed. ADA lockers with lower reach points and appropriate symbols are available. We also have entire suite accessories such as continuous hood systems, fillers, and trim for recessed applications. Fire Extinguisher or Waste Bin Doors and many compartment additions make Penco a comprehensive and flexible locker system.
| SKU |
2W-6151 |
| Weight |
92.00 lbs |
| Ships Within |
Custom Produced - 3 to 4 Weeks |
| Multiple Colors |
Yes |
| Multiple Sizes |
Yes |
| Locker Tiers |
1 Tier |
| Material |
Steel |
| Overall Size |
78”H x 18”W x 12”D |
| Shipping Method |
UPS |
| Shipping Time |
1 to 5 Business Days |
| Warranty |
1 Year Manufacturers Warranty |
 |
Penco Products
The need for storage products is universal and Penco’s reputation for quality fabrication has propelled the company’s influence nationwide. Their product lines include lockers, shelving, pallet racks, storage cabinets, workbenches, shop furniture and more. Ranging from a few units to multi-level installations, Penco sets the industry standard for rugged and dependable design, available in the widest variety of finishes, configurations and sizes.
See All Products from Penco Products
|
3 Randomly Selected Products from Penco Products
|
Penco® Vanguard Standard 72"H Single Row Locker Packages - 1 Tier, 2 Wide sku: 2W-6151
| View other products by Penco Products |
|
This Product is Part of the Vanguard Collection
|
| View Items Customers Purchased with this item
|
- Latch clips engage the door frame at three points on doors over 42" high and two points on all other doors
- Special nylon glides fastened to the latch channel assembly and rubber silencers minimize noise
- Patented die-cast handle that accepts built-in locks or padlocks
- Handle opens with a single motion pull, and closes easily while the spring loaded latch clips secure the door even if locked
- Every door has a continuous door strike
|
|
The Vanguard lockers have been the industry standard for rugged, dependable design for decades. The Vanguard standard lockers are available in a wide variety of configurations and sizes and a.......continued
|
|
|
|
Help:
|
|
|
Product Options
| Market price: |
$279.56
Save
16%
|
| Sale Price: |
$234.83
|
| Reward Points: |
1174 (1 point = $.01) |
| |
|
|
| Sizes |
|
| ID Starting Number |
|
| Handles |
|
| Colors |
|
| Row End Panel |
|
| Leg Options |
|
| Door Ventilation |
|
| Side Perforations |
|
| Locks |
|
| Quantity |
|
|
|
Availability: Custom Produced - 3 to 4 Weeks
|
|
